YP12090 Automatic Hydraulic Press

Generally used to press： Tile thickness：3-30mm 3-6001200mm、2-800800mm、9001800mm、2-10001000mm、10002000mm、2-12001200mm、8002400mm、12002400mm etc, Floor tile, L-size thin tile (slab), Glaze-polished tile, Full body marble tile and Sintered stone.

Generally used to press： Tile thickness：3-30mm 3-600*1200mm、2-800*800mm、900*1800mm、2-1000*1000mm、1000*2000mm、2-1200*1200mm、800*2400mm、1200*2400mm etc, Floor tile, L-size thin tile (slab), Glaze-polished tile, Full body marble tile and Sintered stone.

Back to list

Technical Characteristics Technical Parameters Lay-out Drawing

1.The new designed steel wire winded pre-load structure greatly reduces the stress concentration and maintains sufficient rigidity of the frame, having superior fatigue resistance and load stability.

2.External combined main cylinder structure is stable and reliable, with long service life.

3.Equipped with a new multi-cylinder plate type servo ejector (HLT patented technology), with high accuracy and good reliability.

4.The moving beam adopts four columns guiding, which is high precision and stability.

5.With the newest technology for pressure cylinder, the multi-lever pressing and speed governing functions are realized.

6.Optimize the hydraulic control system; the plunger position, main cylinder pressure, and the ejector all adopt the proportional servo control tech. The key components are selected from the top brands of world to ensure the high performance and reliability of press.

主要技術參數	TECHNICAL DATA	UNIT	YP12090
最大壓制力	Max.Pressing Force	kN	120000
最大頂出力	Max.Ejecting Force	kN	400
動梁最大行程	Max.Plunger Stroke	mm	220
動梁下平面與工作臺面最小間距	Min.Distance between Press Plunger and Table	mm	580
動梁下平面與工作臺面最大間距	Max.Distance between Press Plunger and Table	mm	800
左右立柱間凈空	Clearance between Columns	mm	3030
動梁工作面前后寬度	Useful Width of Plunger	mm	1400
工作臺面前后寬度	Width of Press Table	mm	1620
最大填料深度	Max.Filling Depth	mm	80
空循環次數可達	Working Cycles in idle Stroke	mm-1	14
周期中加壓次數	Strokes Per Cycle	times	2～5
主電機功率	Power of the Main Motor	kW	220
系統裝油量	System Oil Capacity	L	3800
系統耗氣量	Air Consumption	m3/h	0.5
常溫水流量	Water Consumption at 24℃	m3/h	45
主機重量	Weight of the Press Body	t	340