Technical Characteristics Technical Parameters

1.Adopting the wide type structure, improving the out-put per pressing and reducing the energy-saving.

2.Outside suoercharger could accelerate the moving parts, improving the pressing speed.

3.The unique prefiling valve is installed directly under the upper beam, which greatly reduces the volume of the high-pressure oil chamber, improves the rigidity of the pressure transfer chain, increases the pressurization speed and saves system energy.

主要技術參數	TECHNICAL DATA	UNIT	YP1080
最大壓制力	Max.Pressing Force	kN	10800
最大頂出力	Max.Ejecting Force	kN	260
動梁最大行程	Max.Plunger Stroke	mm	150
動梁下平面與工作臺面最小間距	Min.Distance between Press Plunger and Table	mm	385
動梁下平面與工作臺面最大間距	Max.Distance between Press Plunger and Table	mm	535
左右立柱間凈空	Clearance between Columns	mm	1400
動梁工作面前后寬度	Useful Width of Plunger	mm	515
最大填料深度	Max.Filling Depth	mm	60
空循環次數可達	Working Cycles in idle Stroke	mm-1	26
周期中加壓次數	Strokes Per Cycle	times	2～3
主電機功率	Power of the Main Motor	kW	55
系統裝油量	System Oil Capacity	L	900
系統耗氣量	Air Consumption	m3/h	0.2
常溫水流量	Water  Consumption at 24℃	m3/h	18
主機重量	Weight of the Press Body	t	30.1